registering the battery replacement after replacing a new battery and informing the power management system that a new battery has been fitted to the vehicle.
Autel IM508 System
If the battery change is not registered, the power management system will not function properly, which may not provide the battery with enough charging power to operate the car and limit the functions of individual electrical equipment.
1. Tap the Service application button from the MaxiIM Job Menu.
2. Tap BMS button and wait for the vehicle manufacturer screen. You can tap VIN Scan or the vehicle make to acquire vehicle VIN information and tap Yes to confirm. See Vehicle Identification on page 34 for detail.
3. Tap Resetting the information to zero on power supply when replacing the battery in the EPB function list, the list may vary for different vehicles being tested.
4. The stored power supply information is reset using this service.Resetting to zero should only be performed when replacing the (main) battery. Once you confirm all the information displayed, tap Continue to proceed.Autel MaxiIM IM608
5.Tap Start to reset the information to zero.http://www.auteleshop.com
6. Once the reset is completed, the screen displays. Tap Continue.
7. For the Battery Monitoring Sensor (BMS) to calculate the correct battery charging level, the vehicle must be in Sleep mode for a minimum of 4h after reset. In some cases, 6h in Sleep mode may be necessary. Read the onscreen instructions carefully and follow the instructions to ensure vehicle proper functioning.
http://www.auteleshop.com/wholesale/autel-maxiim-im608-advanced-immo-key-programming.html
没有评论:
发表评论